Provide two configurable low voltage relays on captive screw connectors located on the back of the controller that can be configured to control lighting, screen control or other device functions.Provide one digital input on captive screw connector located on the back of the controller that can be used to interface with devices such as sensors, switches.
#Extron mlc 200 series
Provide a remote volume control port located on the back of the controller that can be used to control the volume on Extron’s MPA Series and select XTRA™ Series amplifiers.This port shall allow the control of two devices using a dual IR emitter. Device shall have an IR port on captive screw connector located on the back of the controller for auxiliary AV device control.Provide two configurable RS-232 ports on captive screw connectors located on the back of the controller that can be configured for unidirectional or bidirectional control of AV system components.When configured, these LEDs shall provide visual feedback to reflect the relative of the audio level of the AV system. Device shall feature eight white LEDs arranged vertically located adjacent to the rotary encoder.Device shall provide a rotary encoder knob located in the bottom left of the panel that can be configured to control the audio level of an AV system.Buttons shall feature removable button caps allowing them to be custom labeled for easy identification.Buttons shall illuminate white or red, depending on function, for ease of use in low-light environments.Device shall have a total of ten dual color LED backlit buttons, by default eight for input selection and the remaining two for power.Configuration-based, mountable, Ethernet enabled controller with button panel interface.Provide an Ethernet enabled, three-gang pushbutton controller for the purpose of remotely controlling, monitoring and troubleshooting connected AV equipment and AV systems.
0 kommentar(er)
